CASSA JBL PRX 710 (2 vie:10″-1,5″ / 1500w)

849.00

Solo 2 pezzi disponibili

Compare
SKU: JBPRX710230 Categories: ,

PRX710
is a compact and ultra-lightweight speaker in the PRX700 Series. It has been designed
to deliver maximum performance for its weight and size.




Features

133 dB peak SPL

10″ low-frequency driver for low-distortion and higher SPL

1.5″ diameter next generation JBL neodymium compression driver

JBL designed waveguide for accurate coverage

Efficient Class-D amplifier technology

Normal and Boost user selectable EQ presets

DSP input section, crossover, dynamic limiting, component optimization, selectable
system EQ

Line level and direct microphone input capability

Professional XLR-1/4″ combination inputs, RCA inputs, and XLR loop-through

Integrated 36 mm pole mount socket

Integrated handle with injection molded backing cup for easy transport

Integrated M10 suspension points for easy setup

Lightweight poplar plywood cabinets made structurally sound with tongue and groove
joints and protected by JBL’s tour proven DuraFlex™finish.

Cloth backed, dent-resistant 16 gauge steel grilles

Applications


The PRX710 is the most compact and versatile speaker in the PRX700 Series. Designed
to deliver maximum performance for its weight and size as a front of house main
PA. Two user selectable EQ settings are provided to optimize the system for either
application. With a dual socket pole mount the PRX712 is a perfect match with a
PRX700 Series subwoofer, offering a high performance self-powered sub/sat system.

The PRX710 is comprised of a 10″ woofer, a 2408H-2, 37.5 mm (1.5 in) annular polymer
diaphragm, neodymium compression driver mounted to a 100° by 60° horn, all driven
by 1500 watt Class-D digital power amplifier. Sophisticated DSP is at the core of
a fully featured input section, providing user selectable system EQ, protection,
input sensitivity selection, cross-over functionality, dynamic limiting and discrete
component optimization.

All PRX700 cabinets are built from a combination of 25mm (on the top and bottom
for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally
sound with tongue and groove joints. All PRX700 Series cabinets are protected by
JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant
16 gauge steel and handles are made from light-weight glass-filled nylon for added
strength and durability. All M10 suspension points are constructed from 14 gauge
steel and have been tested with a yield-strength of 1000 lbs. each.

The amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity
switch provides extra flexibility, making it possible to connect literally any sound
source without using a mixer. Signal present and limiter lights indicate the system
status and assist in setting the optimum level via the level control knob.

Specifications



Power Rating 1500 W

Frequency Range (-10 dB) Normal: 50 Hz – 19.6kHz

Boost: 42.9 Hz – 20kHz

Frequency Response (±3 dB) Normal: 63.5 Hz – 18.5kHz

Boost: 53 Hz – 18.6kHz

Coverage Pattern 100° x 60° nominal

Directivity Index (DI) 9 dB

Directivity Factor (Q) 8

Crossover Frequency 1.9 kHz

Maximum SPL 133 dB

Signal Indicators Limit: Yellow LED indicates peak output has been reached and dsp
limiter is acting

Signal: Green LED indicates signal present

Power/Standby: Blue indicates system has power and ready to pass audio,

Red indicates system has power but is in a power saving mode and will not pass audio.

Dynamic Control (Input) dbx Type IV™ limiter circuit

Input Impedance 20K Ohms (balanced), 10K Ohms (unbalanced)

LF Driver 1 x JBL M110-4 250mm (10 in) woofer

HF Driver 1 x JBL 2408H-2 37.5 mm (1.5″) annular polymer diaphragm, neodymium compression
driver

Enclosure Trapezoidal, 18 mm, plywood

Suspension / Mounting single 36 mm pole socket, 8 x M10 Suspension Points, 1 x M10
pull back point

Transport 1 x integrated handle with injection molded backing cup

Finish Obsidian DuraFlex™ finish

Grille Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent
black cloth backing.

Input Connectors 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input

Output Connectors 1 male XLR balanced output

Dimensions (H x W x D) 498.7 mm x 335.6 mm x 322.3 mm (19.63 in x 13.21 in x 12.69
in)

Net Weight 16.4 kg (36 lb)

 

Be the first to review “CASSA JBL PRX 710 (2 vie:10″-1,5″ / 1500w)”

Il tuo indirizzo email non sarà pubblicato. I campi obbligatori sono contrassegnati *

Reviews

There are no reviews yet.

Main Menu